厂家直销{普邦}耐水蜂窝活性炭批发
发布时间:2024-05-19 21:03:52 公司名称:[吉安]普邦环保材料有限公司
产品参数 | |
---|---|
产品价格 | 电议 |
发货期限 | 电议 |
供货总量 | 电议 |
运费说明 | 电议 |
规格 | 100*100*100mm、100*100*50mm、100*100*200mm |
品牌 | 中航 |
产地 | 北京 |
碘值 | 500 |
二是要看蜂窝活性炭产品所产生的气泡,如果产生的气泡越多则产品的质量就越好。我们可以做一个小实验,将一小把蜂窝活性炭产品投入水中,由于水渗透的作用,水会随之浸入活性炭的孔隙中,以此来让孔隙中的空气排出,从而产生一连串的极为小的气泡,在水中拉出一条细小的气泡线,同时又发出了兹兹的气泡声,看着十分有趣。如果这种现象发生的很剧烈的话,而且持续的时间越长,那么就证明蜂窝活性炭产品的孔隙结构非常发达,就是蜂窝活性炭的吸附性越好的表现。
The two is to look at the honeycomb activated carbon products produced by the bubble, if the bubble is more the better the quality of the product. We can do a little experiment, a handful of honeycomb activated carbon products into the water, because the water penetration effect, water will be immersed in the pores of activated carbon, so the pore in the air, resulting in a series of very small bubbles, pulled out a tiny bubbles lines in the water, at the same time also issued Zizi bubble sound, looked very interesting. If this phenomenon is very serious, and the longer the duration, then it is proved that the honeycomb activated carbon product pore structure is very developed, that is, the better adsorption performance of honeycomb activated carbon.
主要成分 | 活性炭 | 正常抗压 | 大于0.8mpa | |
常用规格 | 50*50*100mm、100*100*100mm | 使用温度 | 小于400摄氏度 | |
孔密度 | 100孔/平方英寸、150孔/平方英寸 | 空塔风速 | 0.8米/秒 | |
比表面积 | 大于700平方/克 | 外观 | 产品表面平整,没有裂纹 | |
| ||||
项目 | Sub ject | 指标 | Index | |
规格 | Specification(mm) | 50*50*100 100*100*1000 | ||
碘吸附值 | Iodine Absorb(mg/g) | 》950 | ||
比表面积 | Specific Surface Area(m2/g) | 》1050 | ||
四氯化碳 | CTC(%) | 》65 | ||
抗压强度 | Compressive strebgth(mpa) | 0.9 | ||
水份 | Moisture(%) | 《5 | ||
方孔 | Square hole(in)2 | 150 | ||
壁厚 | Wall thickness(mm) | 1 | ||
使用温度 | Temperature(℃) | 》400 | ||
体积温度 | Bulk Density g/cm3 | 0.35-0.60 | ||
苯吸附率 | Adsorption rate of benzene % | 动态吸附》37 | ||
苯吸附率 | Adsorption rate of benzene % | 静态吸附》52 |
主要成分 | 活性炭 | 正常抗压 | 大于0.8mpa | |
常用规格 | 50*50*100mm、100*100*100mm | 使用温度 | 小于400摄氏度 | |
孔密度 | 100孔/平方英寸、150孔/平方英寸 | 空塔风速 | 0.8米/秒 | |
比表面积 | 大于700平方/克 | 外观 | 产品表面平整,没有裂纹 | |
| ||||
项目 | Sub ject | 指标 | Index | |
规格 | Specification(mm) | 50*50*100 100*100*1000 | ||
碘吸附值 | Iodine Absorb(mg/g) | 》950 | ||
比表面积 | Specific Surface Area(m2/g) | 》1050 | ||
四氯化碳 | CTC(%) | 》65 | ||
抗压强度 | Compressive strebgth(mpa) | 0.9 | ||
水份 | Moisture(%) | 《5 | ||
方孔 | Square hole(in)2 | 150 | ||
壁厚 | Wall thickness(mm) | 1 | ||
使用温度 | Temperature(℃) | 》400 | ||
体积温度 | Bulk Density g/cm3 | 0.35-0.60 | ||
苯吸附率 | Adsorption rate of benzene % | 动态吸附》37 | ||
苯吸附率 | Adsorption rate of benzene % | 静态吸附》52 |
主要成分 | 活性炭 | 正常抗压 | 大于0.8mpa | |
常用规格 | 50*50*100mm、100*100*100mm | 使用温度 | 小于400摄氏度 | |
孔密度 | 100孔/平方英寸、150孔/平方英寸 | 空塔风速 | 0.8米/秒 | |
比表面积 | 大于700平方/克 | 外观 | 产品表面平整,没有裂纹 | |
| ||||
项目 | Sub ject | 指标 | Index | |
规格 | Specification(mm) | 50*50*100 100*100*1000 | ||
碘吸附值 | Iodine Absorb(mg/g) | 》950 | ||
比表面积 | Specific Surface Area(m2/g) | 》1050 | ||
四氯化碳 | CTC(%) | 》65 | ||
抗压强度 | Compressive strebgth(mpa) | 0.9 | ||
水份 | Moisture(%) | 《5 | ||
方孔 | Square hole(in)2 | 150 | ||
壁厚 | Wall thickness(mm) | 1 | ||
使用温度 | Temperature(℃) | 》400 | ||
体积温度 | Bulk Density g/cm3 | 0.35-0.60 | ||
苯吸附率 | Adsorption rate of benzene % | 动态吸附》37 | ||
苯吸附率 | Adsorption rate of benzene % | 静态吸附》52 |
主要成分 | 活性炭 | 正常抗压 | 大于0.8mpa | |
常用规格 | 50*50*100mm、100*100*100mm | 使用温度 | 小于400摄氏度 | |
孔密度 | 100孔/平方英寸、150孔/平方英寸 | 空塔风速 | 0.8米/秒 | |
比表面积 | 大于700平方/克 | 外观 | 产品表面平整,没有裂纹 | |
| ||||
项目 | Sub ject | 指标 | Index | |
规格 | Specification(mm) | 50*50*100 100*100*1000 | ||
碘吸附值 | Iodine Absorb(mg/g) | 》950 | ||
比表面积 | Specific Surface Area(m2/g) | 》1050 | ||
四氯化碳 | CTC(%) | 》65 | ||
抗压强度 | Compressive strebgth(mpa) | 0.9 | ||
水份 | Moisture(%) | 《5 | ||
方孔 | Square hole(in)2 | 150 | ||
壁厚 | Wall thickness(mm) | 1 | ||
使用温度 | Temperature(℃) | 》400 | ||
体积温度 | Bulk Density g/cm3 | 0.35-0.60 | ||
苯吸附率 | Adsorption rate of benzene % | 动态吸附》37 | ||
苯吸附率 | Adsorption rate of benzene % | 静态吸附》52 |